Automotive Cables to ISO, SAEJ, JASO D Automotive Cables. APPLICATIONS OVERVIEW. Standard wall automotive cables are ideal for use in. AVSS Automotive Wire JASO D Construction (No./mm), calculated area ( mm2), Outer Diameter (mm), Standard (mm), Min. (mm), Standard (mm), Max. AVSS Japanese Standard Automotive Cable Conductor:Cu-ETP1 bare according to JIS Insulation:PVC Standard Compliance:JASO D
|Published (Last):||16 April 2012|
|PDF File Size:||18.46 Mb|
|ePub File Size:||16.37 Mb|
|Price:||Free* [*Free Regsitration Required]|
Minimum abrasion resistance shall be as specified in Table 9. The heat resistance A test shall be conducted in accordance standardd the method specified in 5.
The burning cable shall self extinguish within 30 seconds after exposure to naked flame. To check the rated voltage, refer to the “name or symbol and nominal size” indicated on the cable, cable frame, or bundle. This shall be organized at the next regular review of the standard. For this reason, the current details are applied unchanged. When the rate of outside diameter changer is measured after the specified test and standagd the winding test in 6. Minimum number of abrasion cycles shall be as specified in Table Details of specified items in specified elements 5.
After study by the Electrical and Electronic Equipment Subcommittee and the Standardization Board, the revision was approved and determined at the standardization meeting in March For other fuels, the test shall be performed upon an agreement between the parties involved in delivery. Normative reference The following standards, when referred to in this standard, constitute a part of the specifications of this standard. Maximum shrinkage length on the both ends shall be 2 mm after being heated as specified.
However, the use of “f” is neither consistent nor clear. Another idea was proposed that the rated voltage should be indicated on the cable packaging for manufacturers that use the cables for electric devices in EVs and HEVs, but it was also not adopted because of the cost and time required for such indication. This test is applicable to the nominal sizes of 5 or less.
Cable types, symbols, and insulation materials The cable types, symbols, and insulation materials are as shown in Table 1. Therefore, cables of different classes cannot be integrated simply as a single type, and are used separately. Construction and material 5.
China UL, Jaso D Standards AVS Type Automotive Wire – China PVC Jacket, Automotive Wire
Maximum shrinkage length on both ends shall be 2 mm after being heated as specified. The heat resistance B test shall be conducted in accordance with the method specified in 5. The construction shall conform to the applicable standard in Tables 11 to 25 when the test is conducted according to Item 6.
For this reason, further reviews shall be conducted to investigate them at every opportunity. The symbol “f” in the “Nominal size” column means flexible conductor.
The situations are described below.
AVSS Automotive Wire JASO D611
Inthe standard was revised to include these cables. In addition, some nominal sizes include “f”, and the note “The symbol ‘f’ in the ‘Nominal size’ column means Explanatory notes 2 The organization and integration of types and jazo require the understanding and cooperation of many relevant people, and a temporary increase in the types and symbols in These shall be organized and integrated at the next regular review of the 0.
The scrape abrasion test shall be conducted in accordance with the method specified in 5. Conductor Calculated Nominal Number of Approx. In addition, indication of rated voltage is not specified in ISO Minimum values shall be as specified in Table 8.
Jwso, the conductor material for nominal size 0. Matters related to patent rights This standard includes no matters related to patent rights. The tests requiring different performance depending on the nominal size are described in Table 8 to Scope This standard specifies low-voltage cables hereinafter referred to as “cables” used as unscreened single-core jsso cables for automobiles, excluding AV low-voltage cables for automobiles specified in JIS C Therefore, the horizontal burning test in the JASO standard was adopted.
Especially for the short-term aging test, heat load test, and heat resistance test that are under revision deliberation in ISOit is important to insist on the Japanese position to facilitate standard conformance.
Extremely thin wall type cross-linked polyethylene insulated heat resistant low-voltage cables for automobiles Note 2: